Information

E-XK-550 Digital / Analog Trainer in Case

Price: $199.92

Order Product
Printer Friendly Page

This is the same trainer as the XK-700, except in our molded organizer case. The tools shown with the trainer are the most commonly used in the educational field or you can make your own selection of tools and meter to go with the trainer.

Tools in Case

Model XK-550T (shown in photo) is a stock trainer with tools shown below (meter shown is sold separately).

	ET-10 - IC Puller
	JW-140 - Jumper Wire Kit
	SP-2 - Desoldering Pump
	ST-1 - Mini Diagonal Cutters
	ST-2 - Mini Long Nose Pliers
	ST-3 - Wire Stripper
	ST-5 - Screwdriver Slotted 3/16"
	ST-6 - Screwdriver #1 Phillips
	Anti-Static Foam Pad
	When ordering a meter to be used with the XK-550 Trainer, specify a PCV-50 kit which will provide you with velcro to hold the meter in place and an anti-static foam pad that fits below the meter for storage of ICs. This is supplied Free with meter order.
	When ordering tools, specify a TM-30 tool mounting kit. When four or more tools are ordered, the tool mounting kit is supplied Free!

Elenco Electronics can supply the XK-550 Trainer complete with any combination of tools or any of the meters shown in our catalog. Call or write for more information

Power Supplies

Variable Power Supply

+1.25V to 20VDC @ 0.5A (+1.25V to 15VDC @1A)

-1.25 to -20VDC @ 0.5A (-1.25 to -15VDC @1A)

+12VDC @ 1A

-12VDC @ 1A

+5VDC @1A

+30VAC center-tapped to 15 VAC @ 1A

Analog Section

Function Generator - Sine, Triangular, Square Wave.

Frequency adjustable in five ranges from 1 to 100kHz.

Fine frequency adjust.

Amplitude adjust.

DC offset.

Digital Section

Eight data switches.

Two no bounce logic switches.

Eight LED readouts, buffered

Clock frequency 1 to 100kHz.

Clock amplitude 5Vpp square wave.

Fast Track Construction

Most of the components are on one PC board, eliminating all wires between the PC board, pots, regulators and switches. Makes assembly easier and faster, eliminates errors.
The XK-550-SEMI and XK-700-SEMI kits require a minimum of construction and are fast and easy to assemble. The PC board that is shown above comes fully assembled and tested. Where lab time is limited, the SEMI kit is time and cost effective