Courses Page Tronix Labs Kits Page Be Worth More! Learn Electronics! Home
Play the Color Code Challenge! View Top Scores Top Score History Join our Mailing Lists! Simulations

Go to HOME PAGE

E-S-1325 30MHz Dual Trace

Price: $449.00

Order Product
Quantity

Printer Friendly Page

  • 2 Channels
  • Dual or single trace operation
  • Calibrated 20 step timebase with x10 magnifier
  • 1mV/DIV sensitivity
  • Dust cover included
  • 2 free x1, x10 probes
S-1325

Analog Oscilloscopes

 30MHz

Model S-1325
Specifications
Vertical Amplifiers (CH 1 and CH 2) Horixontal Amplifier (continued)
Sensitivity:  5mV/div - 5V/div (x1 mode).
                  1mV/div - 1V/div(6MHz, -3dB)(x5 mode).
Attenuator: 1-2-5 sequence, 10 step attenuator plus vernier control.
Rise Time: About 14ns.
Over Shoot: Less than 5%.
Input Impedance: 1MΩ ±2%, 25pF ±10pF.
Max Input Voltage: 400V (DC + AC peak).
Operating Modes: CH1, CH2, DUAL(ALT or CHOP) and ADD.
Chop Frequency: Approximately 500kHz.
Algebraic Addition: CH 1 + CH 2, CH 1 - CH 2.
Inverter: CH 2 only.
 		 Bandwidth: DC - 1MHz(-3dB).

X-Y Phase Difference: Approximately 3° at 50kHz.
Horizontal Amplifier Sweep System
X-Y Mode: Switch selectable using X-Y switch
          CH 1: X axis.
          CH 2: Y axis.
Accuracy: Y axis±3%, X axis±6%		 Sweep Display Mode: Main, Mix, Delay (S-1330 only).
Hold Off Time: 5:1 continuously variable.
Main Sweep

Sweep Speed: 0.1µs/div -0.2s/div in 1-2-5 sequence, 20 steps
Accuracy: ±3%
Variable Time Control: 5:1, uncalibrated, continuously variable between steps.
Sweep Magnification:
10X, ±10%, extend sweep speed up to 10ns/div.
 
Delayed Sweep (S-1330 only) Component Tester  (S-1330 only)
Sweep Speed: 0.1µs/div - 0.2s/div in 1-2-5 sequence, 20 steps.
Accuracy: ±3%
Sweep Magnification: 10X, ±10%, extend sweep up to 10ns/div.
Delay Time Position: Varaiable control to locate desirable waveform for extending.		 Test Voltage: Max. 6Vms (open circuit).
Test Current: Max. 11mA (shorted).
Test Frequency: Line Frequency.
Components: Capacitor, Inductor, Diode, Transistor, Zener etc.
Trigger CH 2 Output (S-1330 only)
Trigger Coupling: AUTO, NORM, TV-V, TV-H
Trigger Source: CH 1, CH2, ALT, LINE, EXT.
Slope: ±		 Output Level: 100mV/DIV (no load). 50mv/div (50Ω load).
Bandwidth: 20Hz - 30MHz (-3dB).
Trigger Sensitivity Other Specifications
Coupling Bandwidth Internal External CRT:  Type: Rectangular with internal graticule. Adjustable graticule illumination (S-1330 only).
        Display Area: 8 x 10 div (1div = 1 cm).
        Accelerating Voltage: 2.1kV.
        Phosphor: P31
Z Modulation (S-1330 only): Positive TTL signal, low level blank intensity at any intensity, high level unblank any intensity.
Trace Rotation: Adjustable front panel.
Calibrator: Square wave 1kHz, 2.0Vpp±3%
Power requirements: 115, 230VAC±10%, 50/60Hz.
Power Consumption: Approximately 40 watts
Dimensions: 5 1/4" (H) x 12 3/4" (W) x 15 5/8" (D).
New Weight: 16.75lbs (7.6kgs)
Accessories Supplied: Two x1, x10 probes, schematic diagram & parts list, AC power cord, spare fuse and dust cover.
TV-V DC- 1kHz 0.5 div 0.05Vpp
TV-H 1kHz - 100kHz 0.5 div 0.05Vpp
AUTO 100Hz -30MHz 1.5 div 0.1Vpp
NORM 100Hz -30MHz 1.5 div 0.1Vpp